Cost to Reside a House in Racine, WI (2027 Price Guide)
Price your siding in Racine, WI
Plan on roughly $12,440 to $17,960 for new vinyl siding on a 50 x 38 ft. ranch in Racine - about 1,930 sq. ft. of wall. Stepping up to HARDIE fiber cement brings it to $21,590 to $31,190.
Every number here follows the same math as our siding calculator - wall area from the footprint and gables, a simple shape, 10 window and door wraps, new siding over the old - adjusted for local labor (about 3% above the national average). There is no real city premium for siding here - Racine tracks the statewide range of $12,210 to $17,640.
Siding Cost in Racine by Material
Here is the 1,930 sq. ft. job in each siding the calculator covers. Cedar shingles top the list at $22,050 to $31,850; plain vinyl starts at $12,440 to $17,960.
| Material (1,930 sq. ft. of wall) | Installed cost | Estimate | Per square |
|---|---|---|---|
| Vinyl siding | $12,440 to $17,960 | $15,350 | $737.70 |
| Premium vinyl siding | $12,180 to $17,580 | $15,030 | $720.91 |
| Cedar Impressions (vinyl) | $16,470 to $23,790 | $20,340 | $995.84 |
| HARDIE fiber cement | $21,590 to $31,190 | $26,660 | $1,323.24 |
| Cedar clapboard | $19,850 to $28,670 | $24,510 | $1,212.01 |
| Cedar shingles | $22,050 to $31,850 | $27,220 | $1,352.62 |
House priced: 50 x 38 ft. footprint, one story, 5/12 roof (gable ends sided), simple shape, 10 window/door wraps, new siding over the old.
Extras for This House
Extras change the total too. Added cost for this 1,930 sq. ft. vinyl job:
- Old siding off first: about $2,150 to strip vinyl or aluminum, about $4,300 for wood.
- Taller walls: $4,680 more for a 1.5-story raised ranch, $11,690 more for a full two stories.
- Corners and angles: plan on $1,860 extra for a moderately complex outline and $3,140 for one broken up by many corners.
- Trim wraps: $111.23 for every additional window or door.
What Each Siding Costs per Year It Lasts
Divide the installed price by the years of service and the ranking can change. Hover a bar to see the math for Racine.
Lowest cost per year: Vinyl siding ($511.65). Typical service lives with routine care, adjusted for local wear (freeze-thaw cycles). Paint for fiber cement or cedar is not counted.
Build Your Own Siding Estimate
Get a number that matches your walls. This keeps the length, width and stories you set above and reprices the whole job for Racine.
$12,440 – $17,960typical $15,350
Vinyl siding, 19.3 squares at $737.70 · one story
Choosing Siding for the Racine Climate
Siding in Racine has to cope with winter lows near 7°F and summer highs near 82°F. These are the local conditions that decide which material lasts:
Climate regions run from 1 (cool) to 5 (hot); Wisconsin sits in region 1.
Cold-weather impacts. Cold makes vinyl stiff and easier to crack when something hits it. Thicker panels survive a winter of shovels, balls and ladders better; fiber cement ignores the cold, but its cut ends must be sealed.
Sliding snow. Snow dropping off a roof can strike lower walls and deck rails hard. Fiber cement or a heavy vinyl panel takes that hit better than a thin one.
Upper-wall stains. If the house has had ice dams, say so before work starts. Stains high on the walls usually mean water got behind the old siding, and that sheathing should be opened and checked.
The siding season in Racine is short, so the best crews fill their calendars early. Ask for quotes in late winter for a spring or summer start; cold-weather installs can cost more or get pushed back. Racine sits toward the southern end of the Wisconsin cities we cover, so crews can usually work more months of the year and siding sees more summer sun. About 25 miles south of Milwaukee, Racine has its own labor market, and the siding prices on this page are worked out for Racine rather than taken from the bigger city.
Price New Siding for Your ZIP Code
Reading Siding Estimates in Racine
Put quotes side by side on equal terms. These details explain most of the gap:
- Crew. Ask if the seller installs with its own staff or a subcontractor.
- Corners and trim. Matching corner posts and starter strip should be in the price, not an extra.
- Old layer. Taking off old vinyl or aluminum adds about $2,150 here; get it listed as its own line.
Siding Prices Near Racine
Shopping around the region? Here is the vinyl price elsewhere in Wisconsin:
- Milwaukee, WI (25 mi north): $12,650 to $18,270
- Madison, WI (85 mi west): $12,540 to $18,100
- Green Bay, WI (120 mi north): $12,370 to $17,870
- Kenosha, WI (9 mi south): $12,360 to $17,850
Racine Siding Questions, Answered
Is there a typical per-square siding rate in Racine?
Plan on $737.70 per square for vinyl and $1,323.24 for fiber cement, labor included. Wraps, height and tear-off are priced on top of that.
Do I have to remove old siding first?
Not always. Installing over sound, flat siding saves about $2,150-$4,300 on this house; removal is the safer choice when there is water damage or uneven walls.
Vinyl or HARDIE siding - which is the better value?
That depends on your plans. For a long stay or a higher-value home, fiber cement at $21,590 to $31,190 makes sense; for the lowest cost, vinyl at $12,440 to $17,960 is hard to beat.
These are modeled prices, not quotes. They follow our siding calculator with local cost adjustments for Racine; real bids vary with the house shape, height and product line.
More Siding Cost Guides
Wisconsin Siding costs (statewide) · Siding costs in every state
