How Much Does New Siding Cost in Santa Fe, NM? (2027)
Price your siding in Santa Fe, NM
A one-story 50 x 38 ft. house in Santa Fe takes about 19.3 squares of siding: $11,560 to $16,700 in vinyl, $20,070 to $28,990 in HARDIE fiber cement, installed.
The estimate includes materials, labor and trim wraps for 10 openings on a simple 50 x 38 ft. house; removing old siding is priced separately below. Local costs sit about 4% below the national average. Santa Fe prices sit right on the New Mexico average; statewide, vinyl for this house runs $11,440 to $16,530.
What Each Siding Material Costs in Santa Fe
Here is the 1,930 sq. ft. job in each siding the calculator covers. Cedar shingles top the list at $20,500 to $29,600; plain vinyl starts at $11,560 to $16,700.
| Material (1,930 sq. ft. of wall) | Installed cost | Estimate | Per square |
|---|---|---|---|
| Vinyl siding | $11,560 to $16,700 | $14,270 | $685.70 |
| Premium vinyl siding | $11,320 to $16,350 | $13,970 | $670.09 |
| Cedar Impressions (vinyl) | $15,310 to $22,120 | $18,900 | $925.65 |
| HARDIE fiber cement | $20,070 to $28,990 | $24,780 | $1,229.97 |
| Cedar clapboard | $18,450 to $26,650 | $22,780 | $1,126.58 |
| Cedar shingles | $20,500 to $29,600 | $25,300 | $1,257.28 |
House priced: 50 x 38 ft. footprint, one story, 5/12 roof (gable ends sided), simple shape, 10 window/door wraps, new siding over the old.
Extras for This House
Not every house is a one-story box. For the vinyl estimate above, each change works out to:
- Old siding off first: about $2,000 to strip vinyl or aluminum, about $4,000 for wood.
- Taller walls: $4,350 more for a 1.5-story raised ranch, $10,870 more for a full two stories.
- Corners and angles: plan on $1,730 extra for a moderately complex outline and $2,920 for one broken up by many corners.
- Trim wraps: $103.39 for every additional window or door.
Price per Year of Siding
A longer-lasting wall can cost less per year even when it costs more today. The bars show price per year of service for this house.
Lowest cost per year: Vinyl siding ($570.71). Typical service lives with routine care, adjusted for local wear (strong sun). Paint for fiber cement or cedar is not counted.
Build Your Own Siding Estimate
The table prices a simple house with vinyl over the old siding. Change the material, the old layer, the shape and the window count below to price your own job with the same math.
$11,560 – $16,700typical $14,270
Vinyl siding, 19.3 squares at $685.70 · one story
Choosing Siding for the Santa Fe Climate
Before you pick a material, look at what the Santa Fe weather does to an exterior wall over the years:
Climate regions run from 1 (cool) to 5 (hot); New Mexico sits in region 4.
Summer heat. Hot summers push siding to its limits. If you want a dark vinyl color, ask for a line made for it, and make sure panels hang loose enough on their nails to move as they warm.
Desert weather. Color and drainage both matter here. Light, fade-resistant finishes and good flashing over windows and doors cover the two main risks.
Wildfire. In fire-prone areas the siding material matters. Fiber cement does not burn, vinyl melts and wood can ignite, so many such areas favor or require ignition-resistant walls.
Winter is a good time to reside here: dry, mild days suit installation and caulking, and contractors are less busy than in spring. Santa Fe is in Santa Fe County, and most siding crews here cover the wider county. Ask at least one contractor from outside the city for a bid; travel rarely adds much on a whole-house job.
Siding Cost Near You
Getting a Fair Siding Quote in Santa Fe
Low bids often leave work out. Hold each quote to these terms:
- Insulation. Ask if foam board or insulated panels are priced in, and what R-value they add.
- Soffit and fascia. Find out if the roof edge is covered or left as is.
- Payment terms. A small deposit and the balance after the final walk-around is normal.
Other New Mexico Cities Compared
How Santa Fe compares with the rest of New Mexico for this house:
- Albuquerque, NM: about $11,850-$17,120, 55 miles southwest
- Las Cruces, NM: about $11,600-$16,750, 240 miles south
- Rio Rancho, NM: about $11,710-$16,910, 50 miles southwest
Siding Questions
What is the price of siding per 100 square feet?
Per square installed: about $685.70 for vinyl and $1,229.97 for HARDIE fiber cement in Santa Fe. Multiply by the wall area, then add trim wraps and any tear-off.
Is tear-off worth paying for?
Often, yes, if the old siding is flat, dry and sound. Tear-off adds about $2,000 for old vinyl or aluminum here, but it lets the crew fix rot and add a proper weather barrier.
Does fiber cement pay off over vinyl?
That depends on your plans. For a long stay or a higher-value home, fiber cement at $20,070 to $28,990 makes sense; for the lowest cost, vinyl at $11,560 to $16,700 is hard to beat.
Treat these numbers as a budget guide for Santa Fe. They come from our siding calculator with local cost factors; an on-site measure gives the exact figure.
More Siding Cost Guides
New Mexico Siding costs (statewide) · Siding costs in every state
